VMware and Windows Interview Questions: Part 7

1.     Which networking features are recommended while using iSCSI traffic
o    iSCSI port binding
o    Jumbo Frames
2.     Ports used by vCenter
o    80,443,902
3.     What is 'No Access' role
o    Users assigned with the 'No Access' role for an object, cannot view or change the object in any way
4.     When is a swap file created
o    When the guest OS is first installed in the VM
5.     The active directory group, where the members will be ESXi administrators by default.
o    ESX Admins
6.     Which is the command used in ESXi to manage and retrieve information from virtual machines ?
o    vmware-cmd
7.     Which is the command used in ESXi to view live performance data?
o    esxtop
8.     Command line tool used in ESXi to manage virtual disk files?
o    vmkfstools
9.     Port used for vMotion
o    8000
10. Log file location of VMware host
o    \var\log\vmware

Comments

  1. meghanasmiley034 April 2017 at 05:34

    Thanks for this informative article, I hope you will get most positive response specially for this post.

    Vmware Jobs in Hyderabad

    ReplyDelete
  2. chinmoy kanta10 July 2018 at 10:31

    Thanks for the wide range of questions

    ReplyDelete
  3. aaron23 July 2019 at 00:25

    THANK YOU

    ReplyDelete

Post a Comment

Popular posts from this blog

VMware and Windows Interview Questions: Part 2

Image
VMware and Windows Interview Questions: Part 1 VMware and Windows Interview Questions: Part 2 VMware and Windows Interview Questions: Part 3 VMware and Windows Interview Questions: Part 4 VMware and Windows Interview Questions: Part 5 VMware and Windows Interview Questions: Part 6 VMware and Windows Interview Questions: Part 7 VMware and Windows Interview Questions: Part 8 Follow this link for scenario based VMware interview questions. Maximum number of LUNs that can be attached to a host (ESXi 5.0) 256 Maximum number of vCPUs that can be assigned to a VM (ESXi 5.0) 32
Deep dive »

VMware and Windows Interview Questions: Part 3

What is vSAN ? It is a hypervisor-converged storage solution built by aggregating the local storage attached to the ESXi hosts managed by a vCenter.  Recommended iSCSI configuration? A separate vSwitch, and a separate network other than VMtraffic network for iSCSI traffic. Dedicated physical NICs should be connected to vSwitch configured for iSCSI traffic. What is iSCSI port binding ? Port binding is used in iSCSI when multiple VMkernel ports for iSCSI reside in the same broadcast domain and IP subnet, to allow multiple paths to an iSCSI array that broadcasts a single IP address.
Deep dive »

VMware vMotion error at 14%

Issue While performing vMotion, the operation fails at 14% with the below error : A general system error occurred: Migrtion to host <Destination ESXi IP> failed with erro Connection closed by remote host, possibly due to timeout (0xbad003f). Migrate virtual machine:A general system error occurred: Migration to host <Destination ESXi IP> failed with error Connection closed by remote host, possibly due to timeout (0xbad003f). vMotion migration [-1062729272:1406020861428172] (19-71629048648008) failed to receive...  Scenarios Scenario 1: Your management network and vmotion network are in the same subnet using the same physical NIC.
Deep dive »